Welcome to the first in my series of holiday gift posts! I handed these cute little pouches out last night to our daycare providers during their holiday party.  I wish I could take credit for the design, but I can’t – they came from Quilting Arts Magazine special Gifts issue (2009/2010).  The pattern was designed by Margarete Steinhauer and appears on page 132 of the mag (almost all the way at the back).  The pouches are circular, drawstring, lined with coordinating fabrics, and contain 8 small pockets to store pieces of jewelry; or anything else that you might want to store. They fit perfectly in a gift box for a standard-sized mug.

Drafting a pattern from instructions in a magazine is always a little fiddly. I needed to be able to draw 4 different circle sizes and I do not have a compass; even if I did, I doubt I would have had one that would make a large enough circle for this tote.  Instead, I opted for my measurements to be a teeny bit off and ended up using a dinner plate for the outer circle, a largish mixing bowl for the drawstring channel, a pasta bowl for the inner/pocket circle and finally, a tiny mis en plase bowl for the base circle.  The bowls I used for my inner circle and my base circle were exactly right, the outer circle and drawstring channel were slightly off.  Luckily, this did not cause any problems with the final outcome.

Jewelry Pouch – inside
Originally uploaded by alyson_olander

I made seven of these little pouches; the first two as a prototype – once those were done, and I understood how the pattern was supposed to fit together and work, it was easy enough to throw together the other five via the Assembly Line method. I had all of the awesome matching fabrics on hand in my stash, and even the little bits of heavy interfacing needed for the base. The only thing I DID have to buy was the rat tail for the drawstrings. I am absolutely positive that I have a large spool of rat tail somewhere in my sewing room, but it beats me where I put it.  I did not buy enough rat tail so that the pouches will lie flat when opened – I didn’t think it was necessary and I didn’t like the idea that the drawstrings would be so long when the pouches were closed up tight. Overall, I think I would be happy to get one of these as a gift…I really hope the teachers are too!

My New Costume
More pictures on flickr.

Quick-and-Dirty (Renaissance) Skirt
Supplies:

• About double your waist measurement in a lightweight gauze fabric 60 inches wide (selvedge to selvedge)
• Thread to match
• 3/4 inch elastic to fit comfortably but tightly around your waist
• sewing machine and/or serger
• iron/ironing board
• pins

Instructions:
DO NOT CUT OFF THE SELVEDGES.

Sew the two cut ends of fabric together to make a tube, with the selvedges on either end. Serge the seam if you want to/have access to a serger.

Fold one end of the tube down over the other end, putting wrong sides together, having the selvedges meet at the bottom, making a double layer tube with a fold at one end a two selvedges at the other.

Measure this against yourself. If it’s too long, leave it as, we’ll cut it later. If it’s too short, lengthen one layer and shorten the other. The shorter layer will become the outside layer. If the length is just right, Congratulations! You’re one of the lucky ones! Once you have the length where you want it, pin the fold in place and press.

Starting from the seam, sew 1 inch in from the fold, all the way around the tube, leaving a 1 inch opening for the elastic.

Open out the two layers and locate the opening for the elastic. This should be simple since you placed the opening near the (one and only) seam. (Ah, see? There’s a method to my madness!) Insert the elastic, make sure there are no twists or rolls in it, test the length/comfort/tightness and sew it back and forth on the machine a few times so you’re sure it won’t be going anywhere.

Here’s where those of you who are tall can stop. The selvedge is all that you need – you don’t need to hem the skirt, unless you REALLY want to. The selvedges on a gauzy fabric are usually perfectly serviceable, especially for a quick-and-dirty costume skirt. For those of you who the two selvedges together was a perfect length can choose to stop here too, or continue on. That’s right, you’re lucky because you have choices.

I like the look of having the two different layers have two different lengths. If you’re tall, you don’t really have a choice – your layers will be two different lengths unless you want your skirt to be short. For me, I removed 3 inches from the bottom layer (I am 5’4″ and I certainly don’t have “legs to there“) and 6 inches from the top layer. You can choose to finish your hem however you like – fold it under and hem it, zig-zag it, or serge it. In the interest of expediency, I zig-zagged (because I didn’t have any black thread for my serger). If you choose to zig-zag or serge, you have one further choice – lettucing the hem. I also like the look of this as it helps the layers to separate.

It took me maybe 2 hours to make this skirt, only because I was doing it for the first time and needed to be sure of all the measurements and things.  I think I could easily whip one up in an hour now that I’ve done it once.